Recover a Remote Play session

Try the console and client on your home network first. Search for a symptom to see what to test before changing settings.

8Symptom checks
5 MbpsSony minimum, both ways
15 MbpsSony target, both ways

Find the first check

8 of 8 checks

Connection and input

Can’t connect away from home8801330d
First check

Compare a same-network session and a remote session, then check NAT type and UDP 8572.

One player reported this code when home play worked and remote play failed. The code alone does not identify the cause. Sony says NAT Type 3 or an unavailable NAT result can prevent a connection.

Can’t wake the console
First check

Enable internet and network wake in the console’s Rest Mode settings.

Try connecting with the console fully on. If that works, switch to Rest Mode and retry to isolate network wake.

Sign-in fails
First check

Check PlayStation service status and make sure the app uses the console’s account.

If PlayStation services are available, sign in on the console first and use that account in the app before pairing again.

Console missing
First check

Use the console’s pairing number while the computer and console are on the same network.

On PS5, open Link Device. On PS4, open Add Device and check that this PS4 is activated as primary.

Controller won’t connect
First check

Check supported OS and controller combination, then use the supported pairing method.

Check the controller in the client before starting a game. For Sony’s Android TV app, Sony lists DualSense and DUALSHOCK 4 support with some features unavailable.

Performance and stability

Connection is too slow
First check

Check 5 Mbps in both directions, stop competing downloads and aim for 15 Mbps in both directions.

Retest while the network is quiet. On PS4, try lowering the stream resolution if an otherwise working connection keeps stalling.

Windows app crashes
First check

Update or reinstall. For repeat crashes, follow Sony’s AppData reset instructions.

If the app closes before a console session begins, recover the desktop client first. Sony’s connection support page lists the AppData recovery steps.

Display

Black screen or missing content
First check

Test the console home screen and a compatible game. Review restrictions and display requirements before changing HDR.

If menus appear but the problem starts in a game or media app, check its Remote Play restrictions. On Windows, verify the display, Windows HDR and the required HEVC extension before enabling HDR.

Retest one change at a time

Reconnect using the same client after each change. Test locally first, then on an outside network if your original problem only happened away from home.

Open console setup ↗

Show the router reference diagram
Home network path and documented router rules for PS Remote Play and Chiaki-ng
Check the rules for the client and console you are using.

Sources