01
Get the PS5 copy ready
Rockstar’s launch announcement lists November 19, 2026 for PS5 and Xbox Series X|S.
PlayStation lists Remote Play support for GTA VI on PS5. Install or finish updating the game and launch it on the console first.
PlayStation asks for at least 212 GB free on the PS5 for pre-download. A PS4 or Xbox copy cannot serve as the host for this setup.
Find a client for your PS5 ↗02
Enable Remote Play and pair
On PS5, open Settings → System → Remote Play and turn on Enable Remote Play. Use the same PlayStation account in the Sony app and on the PS5.
If the app cannot find the PS5, choose Link Device on the console and enter its number while both devices share the home network.
Open the Windows build ↗03
Test both directions
Sony requires at least 5 Mbps up and down and recommends 15 Mbps in both directions. Use 15 Mbps as your planning target, especially for the PS5 connection’s upload away from home.
Test on the home network first. If Sony’s app works locally and fails outside, check NAT and the documented UDP 8572 rule.
Open the Mac build ↗04
Check your controller and HDR
Pair a supported controller for your client and test it on the PS5 home screen. On Windows, Sony’s HDR path needs a compatible display, Windows HDR and Microsoft’s HEVC Video Extension.
Start in SDR if you are unsure about the display path. Check HDR after the stream and inputs are working.
Open the Windows build and requirements ↗05
Run a first-session check
- Connect from your device and verify picture, sound and controls.
- Launch GTA VI and test a short session from home.
- For away-from-home play, enable internet access and network wake in PS5 Rest Mode. Test waking the PS5 from the app.
Open the Steam Deck Flatpak ↗